LABEL IN ENGLISH
UV blocking and absorption reduce aging and deterioration of surfaces.
Available in a dead flat finish for a completely shine free surface.
Available in a satin finish for depth and a soft sheen.
Apply 2-3 thin coats.
Dilute 10% with water to prime porous surfaces.
Apply with a good quality synthetic brush, recommended, or by conventional spray or High Volume
Rollers are not recommended, stippling may occur. Stir well.
Where a dead flat finish with a high degree of protection is required: apply satin finish first
with a thin coat of dead flat as your final coat.
Drying time: 1 to 2 Hours @ 20°C
Low temperature/high humidity increases drying time.
Cure Time: Up to 5 days @ 20°C
Recoat Time: Up to 2 Hours @ 20°C