Polyvine - Decorators Varnish - DEAD FLAT - ENG - 500ml

DEAD FLAT Finish for a completely shine-free surface.

LABEL IN ENGLISH

Polyvine’s Decorators’ Varnish is the go-to choice for professional and amateur decorators looking for a superior, long-lasting finish.

It’s perfect for use on emulsion paint, wallpaper and other surfaces, and gives long-term protection against finger marks, stains, scuffing and colour fading.

This unique, clear acrylic varnish uses nanotechnology to protect a wide range of decorative surfaces such as paintwork, wallpaper, fabric, wood and plasterwork. And given its UV blocking and absorption properties reduce ageing and deterioration, it’s no wonder it’s the varnish of choice for so many.

Available in either gloss for a shiny finish, satin for depth and a soft sheen, or dead flat for a completely shine-free surface.

UV blocking and absorption reduce aging and deterioration of surfaces.

Ensure the product is well mixed but do not shake.
Apply sparingly, brush out well using a good quality brush. Apply the first coat and allow to dry.
Apply a second coat.
On new wood and porous surfaces dilute the first coat 10% with water.
Lightly sand wood in between applications to remove any raising of the grain that may have occurred.

For a high level of durability and stain resistance, apply two coats of clear satin and one coat of clear dead flat.

Drying Time: 15 min to 1 hour, depending on temperature
Cure Time: 5 days, protect the surface from water and steam for 5 days after application
Recoat Time: 2hrs - 4 hrs, depending on temperature

Polyvine Varnish application - using a BRUSH

Polyvine Varnish application - using a ROLLER

Polyvine Varnish FAILURES - Cause & Remedy