Polyvine - CRAQUELURE System - TOP COAT - 500ml

POLYVINE Craquelure System

Crack effect varnish for a traditional aged finish

This high-quality Polyvine product produces a cracked varnish effect for a traditional aged finish.

By using a simple two part (base coat and top coat) clear acrylic system, this varnish faithfully reproduces the regular crazed pattern associated with old porcelain glazes.

The crackle effect produced by craquelure can be accentuated with a craquelure System Highlighter, available in either white (LIGHT) or dark brown(DARK) for a truly aged finish.

Polyvine Craqueluire Sustem is ideal for Decoupage, small objects, Picture frames, decorative finishes.

PLEASE NOTE that you need to buy both the BASE coat and the TOP coat to create the effect !

Unique Qualities

• Low odour
• Water Wash up
• Easy to apply with Brush
• Drying time: 15 min-1hr (depending on temperature)
• Coverage: 8m² per Litre

Application

• Invert bottle to mix.
• Apply with a good quality brush.
• Craquelure performs very well between 16°c (60°f) and 21°c (70°f).
• Performance outside this range is impaired.
• Seal porous surfaces with the Top Coat before starting and allow to dry.
• Apply a liberal coating of Base Coat to the surface, avoiding brush marks and unevenness.
• Allow to dry – the milky appearance turns clear but the surface remains sticky.
• Apply a coating of Top Coat avoiding brush marks and unevenness.
• As the Top Coat dries, fine cracks will appear.
• If the temperature is too high, play a fan or cold hair dryer over the surface.
• Use Polyvine Craquelure highlighter in dark or light to emphasise the craquelure effect – see swatches for effect.
• For extra protection apply a coat of Top Coat.

Caution

• Always try the technique on a test piece before embarking on the project.
• Walls and vertical surfaces need a lot of practice.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

• Non-hazardous.
• Ensure good ventilation.
• Keep out of reach of children.
• In case of contact with eyes – wash immediately with warm water.
• Remove excess from tools and mixing vessels before washing in warm soapy water.
• Do not empty into drains or watercourses.

</p